Command Line Reference Guide

Content Addressable Memory (CAM) | 427
Defaults
Refer to Parameters
Command Modes
CONFIGURATION
Command
History
Usage
Information
CAM profile changes take effect after the next chassis reboot.
Related
Commands
show cam-ipv4flow
e
t
Display details about the IPv4Flow sub-regions.
Syntax
show cam-ipv4flow
Command Modes
EXEC Privilege
Command
History
Example FTOS#show cam-ipv4flow
-- Chassis Cam Ipv4Flow --
Current Settings Next Boot
Acl : 8K 5K
Multicast Fib/Acl : 9K 12K
Pbr : 1K 1K
Qos : 8K 8K
System Flow : 5K 5K
Trace Lists : 1K 1K
-- Line card 2 --
Current Settings Next Boot
Acl : 5K 0K
qos value Enter the keyword qos followed by the number of entries for the QoS sub-region in
1K increments.
Range: 1 to 32 KB
Default: 8 KB
system-flow value Enter the keyword system-flow followed by the number of entries for the
system-flow sub-region in 1K increments.
Range: 4 to 32 KB
Default: 5 KB
trace-list value Enter the keyword trace-list followed by the number of entries for the trace-list
sub-region in 1K increments.
Range: 1 to 32 KB
Default: 1 KB
Version 8.3.1.0 Command deprecated. Replaced by cam-ipv4flow (CONFIGURATION)
Version 6.3.1.0 Introduced on E-Series
copy Save the running configuration.
show cam-ipv4flow Display the CAM IPv4flow entries.
Version 6.3.1.0 Introduced on E-Series