Command Line Reference Guide

Content Addressable Memory (CAM) | 421
Defaults
None
Command Modes
EXEC Privilege
Command
History
Usage
Information
If the CAM profile has been changed, this command displays the current CAM profile setting in one
column and in the other column displays the CAM profile and the microcode that will be configured
for the chassis and all online line cards after the next reboot.
Example 1
(summary)
FTOS#show cam-profile summary
-- Chassis CAM Profile --
: Current Settings : Next Boot
Profile Name : Default : Default
MicroCode Name : Default : Default
: Current Settings : Next Boot
-- Line card 1 --
Profile Name : Default : Default
MicroCode Name : Default : Default
: Current Settings : Next Boot
-- Line card 6 --
Profile Name : Default : Default
MicroCode Name : Default : Default
FTOS#
Example 2
(profile)
FTOS#show cam-profile
-- Chassis Cam Profile --
CamSize : 18-Meg
: Current Settings : Next Boot
microcode
microcode
Choose the microcode to display. Not all microcodes are available to be paired with a CAM
profile.
• Enter the keyword default to select the microcode that distributes CAM space for a typical
deployment.
• Enter the keyword
lag-hash-align to select the microcode for applications that
require the same hashing for bidirectional traffic.
• Enter the keyword lag-hash-mpls to select the microcode for hashing based on MPLS
labels (up to five labels deep).
• Enter the keyword
ipv6-extacl to select the microcode for IPv6.
• Enter the keyword
acl-group to select the microcode for applications that need 16k egress
IPv4 ACLs.
• Enter the keyword
ipv4-vrf to select the microcode for IPv4 VRF applications.
• Enter the keyword
ipv4-v6-vrf to select the microcode forIPv4 and IPv6 VRF applications.
• Enter the keyword
ipv4-64k-ipv6 to specify the CAM profile that provides an alternate to
ipv6-extacl that redistributes CAM space from the IPv4FIB to IPv4Flow and IPv6FIB.
summary
(OPTIONAL) Enter this keyword to view a summary listing of the CAM profile and microcode
on the chassis and all line cards.
Version 8.2.1.0
Added support for
ipv4-64k-ipv6 profile
Version 7.9.1.0 Added support for VRF protocols.
Version 6.3.1.0 Introduced on E-Series