Command Line Reference Guide

420 | Content Addressable Memory (CAM)
www.dell.com | support.dell.com
L2Qos : 1
FTOS#
Example 2
(Non-default)
FTOS#show cam-acl
-- Chassis Cam ACL --
Current Settings(in block sizes)
L2Acl : 2
Ipv4Acl : 2
Ipv6Acl : 4
Ipv4Qos : 2
L2Qos : 3
-- Line card 4 --
Current Settings(in block sizes)
L2Acl : 2
Ipv4Acl : 2
Ipv6Acl : 4
Ipv4Qos : 2
L2Qos : 3
FTOS#
show cam-profile
e
Display the details of the CAM profiles on the chassis and all line cards.
Syntax
show cam-profile [profile microcode microcode | summary]
Parameters
profile
(OPTIONAL) Choose a single CAM profile to display:
• Enter the keyword default
to specify the default CAM profile.
• Enter the keyword eg-default
to specify the default CAM profile for EG (dual-CAM) line
cards.
• Enter the keyword
ipv4-320k to specify the CAM profile that provides 320K entries for
the IPv4 Forwarding Information Base (FIB)
.
• Enter the keyword ipv4-egacl-16k to specify the CAM profile that provides 16K
entries for egress ACLs.
• Enter the keyword ipv6-extacl to specify the CAM profile that provides IPv6 functionality.
• Enter the keyword l2-ipv4-inacl to specify the CAM profile that provides 32K entries for
ingress ACLs.
• Enter the keyword unified-default to specify the CAM profile that maintains the CAM
allocations for the IPv6 and IPv4 FIB while allocating more CAM space for the Ingress and
Egress Layer 2 ACL, and IPv4 ACL regions.
• Enter the keyword ipv4-vrf to specify the CAM profile that maintains the CAM allocations
for the IPv4 FIB while allocating CAM space for VRF.
• Enter the keyword ipv4-v6-vrf to specify the CAM profile that maintains the CAM
allocations for the IPv4 and IPv6FIB while allocating CAM space for VRF.