Command Line Reference Guide

412 | Content Addressable Memory (CAM) for ExaScale
www.dell.com | support.dell.com
Command
History
Usage
Information
You do not need to enter every parameter for a region. You can enter only the ones you need.
User configured CAM-profiles are automatically validated.
Refer to Content Addressable Memory for ExaScale in the FTOS Configuration Guide for detailed
values supported in each CAM/SRAM region.
microcode
e
x
Assign the microcode to the created CAM-profile template
Syntax
microcode {default | ipv6-switched | lag-hash-align | vrf}
Parameters
Defaults
None
Command Modes
CONFIGURATION-CAM-profile-template
Command
History
Usage
Information
You must assign a microcode to a CAM-profile template.
IPv6 is not supported with VRF microcode on ExaScale.
show cam-profile
e
x
Display the details of the CAM-profiles on the chassis and all line cards.
Syntax
show cam-profile [profile microcode microcode | summary]
Parameters
Defaults
None
Command Modes
EXEC Privilege
Version 8.2.1.0 Introduced on E-Series ExaScale
default
Distributes CAM space for a typical deployment.
• Applies to the Default CAM-profile and the recommended CAM-profile templates.
• Recommended for any user-defined CAM-profiles.
vrf Distributes space to best manage IPv4 and IPv6 VRF packet forwarding
• Applies to the VRF cam-profile template only.
lag-hash-align
ipv6-switched
Version 8.2.1.0 Introduced on E-Series ExaScale
profile
(OPTIONAL) Choose a single CAM profile to display:
summary
(OPTIONAL) Enter this keyword to view a summary listing of the CAM-profile and on the
chassis and all line cards.