Command Line Reference Guide

398 | Border Gateway Protocol IPv4 (BGPv4)
www.dell.com | support.dell.com
BGP version 4, remote router ID 0.0.0.0
BGP state ACTIVE, in this state for 00:00:36
Last read 00:00:41, hold time is 180, keepalive interval is 60 seconds
Received 28 messages, 0 notifications, 0 in queue
Sent 6 messages, 3 notifications, 0 in queue
Received 18 updates, Sent 6 updates
Route refresh request: received 0, sent 0
Minimum time between advertisement runs is 30 seconds
For address family: IPv4 Multicast
BGP table version 14, neighbor version 0
0 accepted prefixes consume 0 bytes
Prefix advertised 0, rejected 0, withdrawn 0
Connections established 3; dropped 3
Last reset 00:00:37, due to user reset
Notification History
'Connection Reset' Sent : 3 Recv: 0
#sho ip bgp ipv4 multicast summary
BGP router identifier 100.10.10.1, local AS number 6400
BGP table version is 14, main routing table version 14
7 network entrie(s) and 7 paths using 972 bytes of memory
2 BGP path attribute entrie(s) using 112 bytes of memory
1 BGP AS-PATH entrie(s) using 35 bytes of memory
Neighbor AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/Pfx
25.25.25.25 6400 21 9 14 0 0 00:02:04 3
211.1.1.129 640 28 6 0 0 0 00:00:21 Active
FTOS#
Table 13-33. Command Example fields: show ip bgp ipv4 multicast summary
Field Description
BGP router identifier Displays the local router ID and the AS number.
BGP table version Displays the BGP table version and the main routing table version.
network entries Displays the number of network entries and route paths and the amount of memory
used to process those entries.
BGP path attribute entries Displays the number of BGP path attributes and the amount of memory used to
process them.
BGP AS-PATH entries Displays the number of BGP AS_PATH attributes processed and the amount of
memory used to process them.
BGP community entries Displays the number of BGP COMMUNITY attributes processed and the amount of
memory used to process them. The show ip bgp community command provides
more details on the COMMUNITY attributes.
Dampening enabled Displayed only when dampening is enabled. Displays the number of paths
designated as history, dampened, or penalized.
Neighbor Displays the BGP neighbor address.
AS Displays the AS number of the neighbor.
MsgRcvd Displays the number of BGP messages that neighbor received.
MsgSent Displays the number of BGP messages that neighbor sent.
TblVer Displays the version of the BGP table that was sent to that neighbor.