Command Line Reference Guide

370 | Border Gateway Protocol IPv4 (BGPv4)
www.dell.com | support.dell.com
Command
History
Table 13-30. Command Example fields: show ip bgp summary
Field Description
BGP router identifier Displays the local router ID and the AS number.
BGP table version Displays the BGP table version and the main routing table version.
network entries Displays the number of network entries and route paths and the amount of
memory used to process those entries.
paths Displays the number of paths and the amount of memory used.
denied paths Displays the number of denied paths and the amount of memory used.
BGP path attribute entries Displays the number of BGP path attributes and the amount of memory used to
process them.
BGP AS-PATH entries Displays the number of BGP AS_PATH attributes processed and the amount of
memory used to process them.
BGP community entries Displays the number of BGP COMMUNITY attributes processed and the amount
of memory used to process them. The show ip bgp community command provides
more details on the COMMUNITY attributes.
Dampening enabled Displayed only when dampening is enabled. Displays the number of paths
designated as history, dampened, or penalized.
Neighbor Displays the BGP neighbor address.
AS Displays the AS number of the neighbor.
MsgRcvd Displays the number of BGP messages that neighbor received.
MsgSent Displays the number of BGP messages that neighbor sent.
TblVer Displays the version of the BGP table that was sent to that neighbor.
InQ Displays the number of messages from that neighbor waiting to be processed.
OutQ Displays the number of messages waiting to be sent to that neighbor.
If a number appears in parentheses, the number represents the number of
messages waiting to be sent to the peer group.
Up/Down Displays the amount of time that the neighbor is in the Established stage.
If the neighbor has never moved into the Established stage, the word never is
displayed.
The output format is:
Time Established----------Display Example
< 1 day ----------------------- 00:12:23 (hours:minutes:seconds)
< 1 week --------------------- 1d21h (DaysHours)
> 1 week --------------------- 11w2d (WeeksDays)
State/Pfxrcd If the neighbor is in Established stage, the number of network prefixes received.
If a maximum limit was configured with the neighbor maximum-prefix
command, (prfxd) appears in this column.
If the neighbor is not in Established stage, the current stage is displayed (Idle,
Connect, Active, OpenSent, OpenConfirm) When the peer is transitioning
between states and clearing the routes received, the phrase (Purging) may appear
in this column.
If the neighbor is disabled, the phrase (Admin shut) appears in this column.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series