Command Line Reference Guide

366 | Border Gateway Protocol IPv4 (BGPv4)
www.dell.com | support.dell.com
show ip bgp peer-group
c e s
Enables you to view information on the BGP peers in a peer group.
Syntax
show ip bgp [ipv4 unicast] peer-group [peer-group-name [detail | summary]]
Parameters
Command Modes
EXEC
EXEC Privilege
Example FTOS#show ip bgp peer-group
Peer-group RT-PEERS
Description: ***peering-with-RT***
BGP version 4
Minimum time between advertisement runs is 30 seconds
For address family: IPv4 Unicast
BGP neighbor is RT-PEERS
Number of peers in this group 20
Peer-group members (* - outbound optimized):
12.1.1.2*
12.1.1.3*
12.1.1.4*
12.1.1.5*
12.1.1.6*
12.2.1.2*
12.2.1.3*
12.2.1.4*
12.2.1.5*
12.2.1.6*
12.3.1.2*
12.3.1.3*
12.3.1.4*
12.3.1.5*
12.3.1.6*
12.4.1.2*
12.4.1.3*
12.4.1.4*
12.4.1.5*
12.4.1.6*
ipv4 unicast
(OPTIONAL) Enter the
ipv4 unicast keywords to view information only related to ipv4
unicast routes.
peer-group-name
(OPTIONAL) Enter the name of a peer group to view information about that peer group
only.
detail (OPTIONAL) Enter the keyword detail to view detailed status information of the peers
in that peer group.
summary (OPTIONAL) Enter the keyword summary to view status information of the peers in
that peer group.
The output is the same as that found in show ip bgp summary command