Command Line Reference Guide

352 | Border Gateway Protocol IPv4 (BGPv4)
www.dell.com | support.dell.com
show ip bgp dampened-paths
c e s
View BGP routes that are dampened (non-active).
Syntax
show ip bgp [ipv4 unicast] dampened-paths
Command Modes
EXEC
EXEC Privilege
Example FTOS>show ip bgp damp
BGP table version is 210708, local router ID is 63.114.8.2
Status codes: s suppressed, d damped, h history, * valid, > best
Path source: I - internal, a - aggregate, c - confed-external, r - redistributed, n - network
Origin codes: i - IGP, e - EGP, ? - incomplete
Network From Reuse Path
FTOS>
Table 13-19, "show ip bgp dampened-paths Command Example," in Border Gateway Protocol IPv4
(BGPv4) defines the information displayed in the example above.
Command
History
show ip bgp detail
c e s
Display BGP internal information for IPv4 Unicast address family.
Syntax
show ip bgp [ipv4 unicast] detail
Defaults
none
Command Modes
EXEC
EXEC Privilege
Example R2#show ip bgp detail
Detail information for BGP Node
bgpNdP 0x41a17000 : NdTmrP 0x41a17000 : NdKATmrP 0x41a17014 : NdTics 74857 :
NhLocAS 1 : NdState 2 : NdRPMPrim 1 : NdListSoc 13
NdAuto 1 : NdEqCost 1 : NdSync 0 : NdDefOrg 0
NdV6ListSoc 14 NdDefDid 0 : NdConfedId 0 : NdMedConfed 0 : NdMedMissVal -1 :
NdIgnrIllId 0 : NdRRC2C 1 : NdClstId 33686273 : NdPaTblP 0x41a19088
Table 13-19. show ip bgp dampened-paths Command Example
Field Description
Network Displays the network ID to which the route is dampened.
From Displays the IP address of the neighbor advertising the dampened route.
Reuse Displays the hour:minutes:seconds until the dampened route is available.
Path Lists all the ASs the dampened route passed through to reach the destination network.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series