Command Line Reference Guide

350 | Border Gateway Protocol IPv4 (BGPv4)
www.dell.com | support.dell.com
Command
History
show ip bgp community-list
c e s
View routes that are affected by a specific community list.
Syntax
show ip bgp [ipv4 unicast] community-list community-list-name [exact-match]
Parameters
Command Modes
EXEC
EXEC Privilege
Example FTOS#show ip bgp community-list pass
BGP table version is 0, local router ID is 10.101.15.13
Status codes: s suppressed, d damped, h history, * valid, > best
Path source: I - internal, a - aggregate, c - confed-external, r - redistributed, n - network
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
FTOS#
The show ip bgp community-list command without any parameters lists BGP routes matching the
Community List and the output is the same as for the show ip bgp command output.
Weight Displays the route’s weight
Path Lists all the ASs the route passed through to reach the destination network.
Table 13-17. Command Example Fields: show ip bgp community
Field Description
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series
ipv4 unicast
(OPTIONAL) Enter the
ipv4 unicast keywords to view information only
related to ipv4 unicast routes.
community-list-name
Enter the name of a configured IP community list. (max 16 chars)
exact-match
Enter the keyword for an exact match of the communities.
Table 13-18. show ip bgp community-list Command Example Fields
Field Description
Network Displays the destination network prefix of each BGP route.
Next Hop Displays the next hop address of the BGP router.
If 0.0.0.0 is listed in this column, then local routes exist in the routing table.
Metric Displays the BGP route’s metric, if assigned.
LocPrf Displays the BGP LOCAL_PREF attribute for the route.
Weight Displays the route’s weight
Path Lists all the ASs the route passed through to reach the destination network.