Command Line Reference Guide

Border Gateway Protocol IPv4 (BGPv4) | 347
Table 13-15, "show ip bgp Command Example Fields," in Border Gateway Protocol IPv4 (BGPv4)
defines the information displayed in the example above
Related
Commands
Command
History
show ip bgp cluster-list
c e s
View BGP neighbors in a specific cluster.
Syntax
show ip bgp [ipv4 unicast] cluster-list [cluster-id]
Parameters
Command Modes
EXEC
EXEC Privilege
Example FTOS#show ip bgp cluster-list
BGP table version is 64444683, local router ID is 120.1.1.1
Status codes: s suppressed, d damped, h history, * valid, > best
Path source: I - internal, a - aggregate, c - confed-external, r - redistributed, n - network
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
* I 10.10.10.1/32 192.68.16.1 0 100 0 i
* I 192.68.16.1 0 100 0 i
*>I 192.68.16.1 0 100 0 i
* I 192.68.16.1 0 100 0 i
* I 192.68.16.1 0 100 0 i
* I 192.68.16.1 0 100 0 i
* I 10.19.75.5/32 192.68.16.1 0 100 0 ?
* I 192.68.16.1 0 100 0 ?
*>I 192.68.16.1 0 100 0 ?
Table 13-15. show ip bgp Command Example Fields
Field Description
Network Displays the destination network prefix of each BGP route.
Next Hop Displays the next hop address of the BGP router.
If 0.0.0.0 is listed in this column, then local routes exist in the routing table.
Metric Displays the BGP route’s metric, if assigned.
LocPrf Displays the BGP LOCAL_PREF attribute for the route.
Weight Displays the route’s weight
Path Lists all the ASs the route passed through to reach the destination network.
show ip bgp community View BGP communities.
neighbor maximum-prefix Control number of network prefixes received.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series
ipv4 unicast
(OPTIONAL) Enter the
ipv4 unicast keywords to view information only related to ipv4
unicast routes.
cluster-id
(OPTIONAL) Enter the cluster id in dotted decimal format.