Command Line Reference Guide

312 | Border Gateway Protocol IPv4 (BGPv4)
www.dell.com | support.dell.com
capture bgp-pdu max-buffer-size
c e s
Set the size of the BGP packet capture buffer. This buffer size pertains to both IPv4 and IPv6 addresses.
Syntax
capture bgp-pdu max-buffer-size 100-102400000
Parameters
Defaults
40960000 bytes.
Command Modes
EXEC Privilege
Related
Commands
Command
History
clear ip bgp ipv4 unicast soft
c e s
Clear and reapply policies for IPv4 routes without resetting the TCP connection; that is, perform BGP
soft reconfiguration.
Syntax
clear ip bgp {* | as-number | ipv4-neighbor-addr | ipv6-neighbor-addr | peer-group name} [ipv4
unicast] soft [in | out]
Parameters
Command Modes
EXEC Privilege
100-102400000
Enter a size for the capture buffer.
capture bgp-pdu neighbor Enable capture of an IPv4 BGP neighbor packet.
capture bgp-pdu neighbor (ipv6) Enable capture of an IPv6 BGP neighbor packet.
show capture bgp-pdu neighbor Display BGP packet capture information for an IPv6 address on the
E-Series.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series
Version 7.5.1.0 Introduced
*
Clear and reapply policies for all BGP sessions.
as-number Clear and reapply policies for all neighbors belonging to the AS.
Range: 0-65535 (2-Byte) or
1-4294967295 (4-Byte)
or
0.1-65535.65535 (Dotted format)
ipv4-neighbor-addr |
ipv6-neighbor-addr
Clear and reapply policies for a neighbor.
peer-group name
Clear and reapply policies for all BGP routers in the specified peer group.
ipv4 unicast
Clear and reapply policies for all IPv4 unicast routes.
in
Reapply only inbound policies.
Note: If you enter soft, without an in or out option, both inbound and outbound
policies are reset.
out
Reapply only outbound policies.
Note: If you enter
soft, without an in or out option, both inbound and outbound
policies are reset.