Command Line Reference Guide

Border Gateway Protocol IPv4 (BGPv4) | 299
FTOS(conf)#router bgp 1
FTOS(conf-router_bgp)#bgp asnotation asdot+
FTOS(conf-router_bgp)#ex
FTOS(conf)#do show run | grep bgp
router bgp 1
bgp four-octet-as-support
bgp asnotation asdot+
FTOS(conf)#router bgp 1
FTOS(conf-router_bgp)#bgp asnotation asplain
FTOS(conf-router_bgp)#ex
FTOS(conf)#do show run |grep bgp
router bgp 1
bgp four-octet-as-support
bgp asnotation asplain
FTOS(conf)#
bgp bestpath as-path ignore
c e s
Ignore the AS PATH in BGP best path calculations.
Syntax
bgp bestpath as-path ignore
To return to the default, enter no bgp bestpath as-path ignore.
Defaults
Disabled (that is, the software considers the AS_PATH when choosing a route as best).
Command Modes
ROUTER BGP
Usage
Information
If you enable this command, use the clear ip bgp ipv4 unicast soft * command to recompute the best
path.
Command
History
bgp bestpath med confed
c e s
Enable MULTI_EXIT_DISC (MED) attribute comparison on paths learned from BGP confederations.
Syntax
bgp bestpath med confed
To disable MED comparison on BGP confederation paths, enter no bgp bestpath med confed.
Defaults
Disabled
Command Modes
ROUTER BGP
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series