Command Line Reference Guide

ACL VLAN Group | 277
member vlan
e
Add VLAN member(s) to an ACL VLAN group.
Syntax
member vlan {VLAN-range}
Parameters
Defaults
No default behavior or values
Command Modes
CONFIGURATION (conf-acl-vl-grp)
Command
History
Usage
Information
At a maximum, there can be only 32 VLAN members in all ACL VLAN groups. A VLAN can belong
to only one group at any given time.
Related
Commands
show acl-vlan-group
e
Display all the ACL VLAN Groups or display a specific ACL VLAN Group, identified by name.
Syntax
show acl-vlan-group {group name | detail}
Parameters
Defaults
No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command
History
Usage Notes
When an ACL-VLAN-Group name or the Access List Group Name contains more than 30 characters,
the name will be truncated in the show acl-vlan-group command output.
Example 1
(show acl-vlan
group)
The following example shows the table style display used with the show acl-vlan-group command.
Note that some group names and some access list names are truncated.
FTOS#show acl-vlan-group
Group Name Egress IP Acl Vlan Members
TestGroupSeventeenTwenty SpecialAccessOnlyExperts 100,200,300
VLAN-range
Enter the comma separated VLAN ID set. For example, 1-10,400-410,500
Version 6.3.1.0 Introduced on E-Series
show acl-vlan-group Display the ACL VLAN Groups
group name
(Optional) Display only the ACL VLAN Group that is specified, up to 140 characters.
detail Display information in a line-by-line format to display the names in their entirety.
Note: Without the detail option, the output is displayed in a table style and information may
be truncated.
Version 7.8.1.0 Increased name string to accept up to 140 characters. Prior to 7.8.1.0, names are up to 16
characters long.
Version 6.3.1.0 Introduced on E-Series