Command Line Reference Guide

164 | 802.1ah
www.dell.com | support.dell.com
ethernet oam link-monitor frame-seconds
s
Set the frame-error seconds per time period thresholds and window.
Syntax ethernet oam link-monitor frame-seconds threshold {high {milliseconds | none} | low milliseconds |
window milliseconds}
Parameters
Defaults
As above
Command Mode
INTERFACE
Command
History
ethernet oam link-monitor high-threshold action
s
Disable an interface when the high threshold is exceeded for any of the monitored error conditions.
Syntax ethernet oam link-monitor high-threshold action error-disable-interface
Defaults
Enabled
Command Mode
INTERFACE
Command
History
high {milliseconds | none} Specify the high threshold value for frame error seconds per time period, or
disable the high threshold.
Range: 1-900
Default: None
low milliseconds Specify the low threshold for frame error seconds per time period.
Range: 1-900
Default: 1
window milliseconds Specify the time period for error second per time period condition.
Range: 100-900, in multiples of 100
Default: 1000 milliseconds
Version 8.4.1.0 Introduced on S-Series
Version 8.4.1.0 Introduced on S-Series