Command Line Reference Guide

E-Series Debugging and Diagnostics | 1479
Egress Counters SPI 1
SPI4_ABORT : 0
C2_TO_T2_DIP2 : 0
C2_TO_T2_DIP4 : 0
SPI4_LOSS_CNT1 : 0
C2_TO_T2_RX_PKT_COUNTER_CRC : 0
C2_TO_T2_RX_PKT_COUNTER_LO : 0
C2_TO_T2_RX_PKT_COUNTER_HI : 0
EBC_DROP : 0
EFA_TX_PKT_LO : 0
EFA_TX_PKT_HI : 0
EGRESS_DROP_COUNT : 0
CMB_IC_DROP : 0
CMB_LG_DROP : 0
CMB_SF_DROP : 0
CMB_IPM_DROP : 0
CMB_OPM_DROP : 0
FTOS#
Related
Commands
show hardware fpc lookup detail
e
Display diagnostic and debug information related to the lookup functional area of the Flexible Packet
Classification (FPC).
Syntax
show hardware linecard number port-set pipe-number fpc lookup detail
Parameters
Defaults
No default values or behavior.
Command Modes
EXEC
EXEC Privilege
Command
History
Example FTOS#show hardware linecard 0 port-set 0 fpc lookup detailed
Summary of Error Registers
------- -- ----- ---------
0 Counters Enabled :
Cyclone 1.5 ChassisMap : 0x00000000
Cyclone 1.5 MixedMode : 0x00000000
T2L party Status : No Errors
partyType ErrorCount
---------- ----------
show hardware fpc lookup detail Display fpc lookup information.
linecard number Enter the keyword linecard followed by the line card slot number.
Range: 0 to 13 on a E1200, 0 to 6 on a E600/E600i, and 0 to 5 on an E300
port-set pipe-number Enter the keyword port-set followed by the number of the line card’s Port-Pipe.
Range: 0 to 1
Version 6.5.4.0 Introduced