Command Line Reference Guide

E-Series Debugging and Diagnostics | 1477
Output for portpipe 0 Ingress
PC_SPI4_BADPORT_CNTR [0x000230] = 16777216
PC_SPI4_EOP_ABORT_CNTR [0x000234] = 33554432
PC_SPI4_MISS_SOP_CNTR [0x00238] = 50331648
Output for portpipe 0 Egress
FC_BAD_CRC_ERR_CNTR [0x000250] = 150994944
FTOS#
Related
Commands
show hardware fpc forward
e
Display receive and transmit counters, error counters and status registers for the forwarding functional
area of the FPC (flexible packet classification engine).
Syntax
show hardware linecard number port-set pipe-number fpc forward {counters | drops | spi
{err-counters | spichannel# counters} | status}
Parameters
Defaults
No default values or behavior.
Command Modes
EXEC
EXEC Privilege
Command
History
Example (show
hardware fpc
forward drops)
FTOS#show hardware linecard 4 port-set 0 fpc forward drops
SPI 0
ICMP Drops : 0x0
ACL Drops : 0x0
IBC_DROP : 0
EBC_DROP : 0
IFA_DROP_CNT : 0
EFA_DROP_CNT : 0
CMB_IC_DROP : 0
CMB_LG_DROP : 0
CMB_SF_DROP : 0
clear hardware btm Clear the btm counters
linecard number Enter the keyword linecard followed by the line card slot number.
Range: 0 to 13 on E1200, 0 to 6 on E600/E600i, and 0 to 5 on E300
port-set pipe-number Enter the keyword port-set followed by the number of the line card’s Port-Pipe.
Range: 0 to 1
counters (OPTIONAL) Enter the keyword counters to display the FPC receive and
transmit packet, byte counters, and error counters.
drops (OPTIONAL) Enter the keyword drops to display FPC drop-related error counters.
spi err-counters (OPTIONAL) Enter the keywords spi err-counters to display the FPC
System Packet Interface (SPI) receive and transmit packet, byte counters, error
counters, and key status registers on the ingress and egress paths.
spi spichannel# counters (OPTIONAL) Enter the keywords spi spichannel# counters to display the
FPC System Packet Interface level 4 (SPI4) counters.
status (OPTIONAL) Enter the keywords status to display FPC status registers.
Version 6.5.4.0 Introduced