Command Line Reference Guide

1474 | E-Series Debugging and Diagnostics
www.dell.com | support.dell.com
Command
History
Usage
Information
This command enables a hardware watchdog mechanism that automatically reboots an FTOS switch/
router with a single unresponsive RPM. This is a last resort mechanism intended to prevent a manual
power cycle.
show cpu-interface-stats
e
The command provides an immediate snapshot of the health of the internal RPM and line card CPU.
Generally this command is used in concert with Dell Force10 Technical Support engineers.
Syntax
show cpu-interface-stats {cp | lp | rp1 | rp2}
Parameters
Defaults
No default behavior or values.
Command Modes
EXEC
EXEC Privilege
Command
History
Example (show
cpu-interface-stats
lp)
FTOS#show cpu-interface-stats lp 1
-- Dataplane PP1 interface statistics --
Link state : Up
Recv Interrupts/Polls: 0
Recv Packets : 9807 Transmit Packets : 9808
Recv Desc Error : 0 Transmit Desc Error : 0
Recv Out of Mem : 0 Transmit Out of Mem : 0
Recv Upper Layer Full: 0 Transmit Pause Pkts : 0
Recv Other Error : 0 Transmit Other Error: 0
Recv Restarts : 0
Recv Restarts Fatal : 0
-- Dataplane PP0 interface statistics --
Link state : Up
Recv Interrupts/Polls: 0
Recv Packets : 9807 Transmit Packets : 9807
Recv Desc Error : 0 Transmit Desc Error : 0
Recv Out of Mem : 0 Transmit Out of Mem : 0
Recv Upper Layer Full: 0 Transmit Pause Pkts : 0
Recv Other Error : 0 Transmit Other Error: 0
Recv Restarts : 0
Recv Restarts Fatal : 0
-- Partybus RPM0 interface statistics --
Link state : Up
Recv Interrupts/Polls: 0
Recv Packets : 171611 Transmit Packets : 329859
Recv Desc Error : 0 Transmit Desc Error : 0
Version 7.7.1.0 Introduced
cp Enter the keyword cp to display the CP's interface statistics.
lp Enter the keyword lp to display the LP's interface statistics
rp1 Enter the keyword rp1 to display the RP1's interface statistics
rp2 Enter the keyword rp2 to display the RP2’s interface statistics.
Version 7.6.1.0 Introduced on E-Series