Command Line Reference Guide

1472 | E-Series Debugging and Diagnostics
www.dell.com | support.dell.com
Defaults
No default behavior or values.
Command Modes
EXEC
EXEC Privilege
Command
History
Example FTOS#clear hardware linecard 2 port-set 0 btm ingress errors
FTOS#clear hardware rpm 1 port-set 0 btm ingress errors
FTOS#clear hardware rpm 0 port-set 0 btm ingress errors
% Error: RPM 0 is not active.
FTOS#
Related
Commands
clear hardware rpm mac counters
e
Clear the MAC counters for the party-bus control switch on the IPC subsystem of the RPM.
Syntax
clear hardware rpm slot-number mac counters
Parameters
Defaults
No default behavior or values.
Command Mode
EXEC
EXEC Privilege
Command
History
port-set pipe-number Enter the keyword port-set followed by the number of the line card or RPM’s
Port-Pipe.
Range: 0 to 1
egress errors | status
(OPTIONAL) Enter the keywords egress errors or egress status to clear
egress BTM error counters or ingress BTM status registers.
ingress errors | status
(OPTIONAL) Enter the keywords ingress errors or ingress status to clear
ingress BTM error counters or ingress BTM status registers.
all errors | status
(OPTIONAL) Enter the keywords all errors or all status to clear both egress
and ingress BTM error counters and status registers.
Version 6.5.4.0 Introduced
show hardware btm Display the BTM counters
slot-number
Enter the RPM slot number.
Range: 0 -1
Version 6.5.4.0 Introduced