Command Line Reference Guide

1468 | E-Series Debugging and Diagnostics
www.dell.com | support.dell.com
-- RPM Failover Record --
------------------------------------------------
Failover Count: 0
Last failover timestamp: None
Last failover Reason: None
------------------------------- show running-config ------------------------
Current Configuration ...
! Version 6.5.4.1
!
boot system rpm0 primary flash://FTOS-EF-6.5.4.1.bin
boot system rpm0 secondary flash://FTOS-EF-6.5.4.1.bin
boot system rpm0 default flash://FTOS-EF-6.5.4.1.bin
!
redundancy auto-failover-limit count 3 period 60
redundancy auto-synchronize full
redundancy disable-auto-reboot rpm
redundancy primary rpm0
!
hostname E600-TAC-3
!
cam-ipv4flow multicast-fib 9 pbr 1 qos 8 system-flow 5 trace-list 1
!
...
Related
Commands
Offline Diagnostic Commands
The offline diagnostics test suite is useful for isolating faults and debugging hardware. The tests results
are written to a file in flash memory and can be displayed on screen. Detailed statistics for all tests are
collected.
These statistics include:
• last execution time
• first test pass time and last test pass time
• first test failure time and last test failure time
• total run count
• total failure count
• consecutive failure count
•error code
The offline diagnostics commands are:
• diag linecard
•offline
• online
• show diag
show version Display the FTOS version.
show linecard Display the line card(s) status.
show environment (C-Series and E-Series)
Display
system component status.
show processes memory (C-Series and E-Series) Display memory usage based on running processes.