Command Line Reference Guide

1462 | E-Series Debugging and Diagnostics
www.dell.com | support.dell.com
Slot Test Status Last Result Time Stamp
------------------------------------------------------
0 off none
1 off none
2 on pass Mar 26 2007 12:41:56
3 off none
4 off none
5 off none
6 off none
7 off none
8 off none
9 off none
10 off none
11 on pass Mar 26 2007 12:41:56
12 off none
13 off none
FTOS#
show processes ipc
e
Display IPC messaging used internally between FTOS processes.
Syntax
show processes ipc [recv-stats | send-stats] [cp | rp1 | rp2 | lp linecard-number]
Parameters
Defaults
No default values or behavior.
Command Modes
EXEC
EXEC Privilege
Command
History
Example (show
processes ipc
recv-stats)
FTOS#show processes ipc recv-stats lp 0
IPC Receive Statistics on LP 0
Memory Used by Recv DB on this processor: 6825992 bytes
SeqNo - Last successfull Guaranteed IPC Pkt Seq No delivered from source to destination
HiWtmk - Highest socket watermark reached for destination
M-SkSize - Max socket size of destination
NonG-Rcvd - No of non-guaranteed IPC pkts received
Pri-Dr - Priority drops done for non-guaranteed pkts due to socket almost-full condition
recv-stats (OPTIONAL) Enter the keyword recv-stat to display the receiver-side details of the
IPC messages.
send-stats (OPTIONAL) Enter the keyword send-stats to display the sender-side details of the
IPC messages.
cp (OPTIONAL) Enter the keyword cp to view the Control Processor’s swpq statistics.
rp1 (OPTIONAL) Enter the keyword rp1 to view the Control Processor’s swpq statistics
on Route Processor 1.
rp2 (OPTIONAL) Enter the keyword rp2 to view the Control Processor’s swpq statistics
on Route Processor 2.
lp linecard-number (OPTIONAL) Enter the keyword lp followed by the line card number to view the
Control Processor’s swpq statistics on the specified line card.
Version 7.5.1.0 Introduced