Command Line Reference Guide

146 | Control and Monitoring
www.dell.com | support.dell.com
10 -rwx 29555751 May 12 2008 17:29:42 +00:00 FTOS-EF-4.7.6.0.bin
11 -rwx 27959813 Apr 04 2008 15:05:12 +00:00 FTOS-EF-7.5.1.0.bin
12 -rwx 4693 May 12 2008 17:24:36 +00:00 config051508
13 -rwx 29922288 Jan 11 2008 14:58:36 +00:00 FTOS-EF-7.6.1.0.bin
14 -rwx 6497 Aug 22 2008 14:18:56 +00:00 startup-config
15 -rwx 5832 Jul 25 2008 11:13:36 +00:00 startup-config.bak
16 -rwx 29947358 Jul 25 2008 11:04:26 +00:00 FTOS-EF-7.6.1.2.bin
17 -rwx 10375 Aug 25 2008 10:55:18 +00:00 LauraSave
flash: 520962048 bytes total (40189952 bytes free)
FTOS#
Usage
Information
Without the linecard or page option, the command output is continuous, use CNTL-z to interrupt the
command output.
The save option works with other filtering commands. This allows you to save specific information of
a show command. The save entry should always be the last option.
For example:
FTOS#show tech-support |grep regular-expression |except regular-expression | find
regular-expression | save flash://result
This display output is an accumulation of the same information that is displayed when you execute one
of the following show commands:
• show cam-profile
• show cam-ipv4flow
• show chassis
• show clock
• show environment
• show file-system
• show interface
• show inventory
• show ip management-route
• show ip protocols
• show ip route summary
• show processes cpu
• show processes memory
• show redundancy
•show rpm
• show running-conf
•show sfm
• show version
Related
Commands
show version Display the FTOS version.
show linecard Display the line card(s) status.
show environment (C-Series and
E-Series)
Display
system component status.
show processes memory
(C-Series and E-Series)
Display memory usage based on running processes.