Command Line Reference Guide

1446 | E-Series ExaScale Debugging and Diagnostics
www.dell.com | support.dell.com
show ipc-traffic rpm-switch
e
x
Display information relating to packet counts for the RPM Switch’s IPC traffic.
Syntax
show ipc-traffic rpm [0-1] rpm-switch {counters | configuration | qos-counters | qos-configuration |
cp-port | rp1-port | rp2-port | lc-switch # | Peer-RPM} {counters | configuration | qos-counters |
qos-configuration}
Parameters
Defaults
No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command
History
rpm-switch Enter the keyword rpm-switch to display the RPM Switch’s IPC related information.
counters (OPTIONAL) Enter the keyword counters to display the IPC counters.
drops (OPTIONAL) Enter the keyword drops to display IPC drop-related error counters.
configuration (OPTIONAL) Enter the keyword configuration to display the RP-Switch related IPC
configuration.
qos-counters (OPTIONAL) Enter the keyword qos-counters to display the RP-Switch qos-counters..
qos-configuration (OPTIONAL) Enter the keyword qos-configuration to display the RP-Switch
qos-configuration.
cp-port (OPTIONAL) Enter the keyword cp-port to display the RP-Switch information for
the CP port.
rp1-port (OPTIONAL) Enter the keyword rp1-port to display the RP-Switch information for
the RP1 port.
rp2-port (OPTIONAL) Enter the keyword rp2-port to display the RP-Switch information for
the CRP2 port.
lc-switch (OPTIONAL) Enter the keyword lc-switch to display the counter information for the
LC-Switch.
peer-rpm (OPTIONAL) Enter the keyword peer-rpm to display information for the peer RPM.
Version 8.1.1.2 Introduced on E-Series ExaScale E600i
Version 8.1.1.0 Introduced on E-Series ExaScale E1200i