Command Line Reference Guide

E-Series ExaScale Debugging and Diagnostics | 1435
Defaults
No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command
History
Example FTOS#show hardware linecard 1 port-set 2 btm all errors
Output for portpipe 0 Ingress
PC_SPI4_BADPORT_CNTR [0x000230] = 16777216
PC_SPI4_EOP_ABORT_CNTR [0x000234] = 33554432
PC_SPI4_MISS_SOP_CNTR [0x00238] = 50331648
Output for portpipe 0 Egress
FC_BAD_CRC_ERR_CNTR [0x000250] = 150994944
FTOS#
Related
Commands
show hardware fpc forward
e
x
Display receive and transmit counters, error counters and status registers for the forwarding functional
area of the FPC (flexible packet classification engine).
Syntax
show hardware linecard number port-set pipe-number fpc forward {counters | drops | spi
{err-counters | spichannel# counters} | status}
Parameters
all errors | status | queues
(OPTIONAL) Enter the keywords all errors, all status, or all queues to
view all BTM error counters, status registers, or packet queue
register
starting-value
[
number_of_registers]
Enter the keyword register followed by the starting value of the register to
read from.
Range: 0 to 16777212
Optionally, enter the number of registers to read from. If no value is specified,
only one line is displayed.
Range: 1 to 512
Version 8.1.1.2 Introduced on E-Series ExaScale E600i
Version 8.1.1.0 Introduced on E-Series ExaScale E1200i
clear hardware btm Clear the btm counters
linecard
number Enter the keyword linecard followed by the line card slot number.
Range: 0 to 13 on E1200, 0 to 6 on E600/E600i, and 0 to 5 on E300
port-set
pipe-number Enter the keyword port-set followed by the number of the line card’s Port-Pipe.
Range: 0 to 1
counters
(OPTIONAL) Enter the keyword counters to display the FPC receive and transmit
packet, byte counters, and error counters.
drops
(OPTIONAL) Enter the keyword
drops to display FPC drop-related error counters.
spi err-counters
(OPTIONAL) Enter the keywords spi err-counters to display the FPC System
Packet Interface (SPI) receive and transmit packet, byte counters, error counters, and
key status registers on the ingress and egress paths.