Command Line Reference Guide

1432 | E-Series ExaScale Debugging and Diagnostics
www.dell.com | support.dell.com
Defaults
No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command
History
show cpu-interface-stats
e
x
The command provides an immediate snapshot of the health of the internal RPM and line card CPU.
Generally this command is used in concert with Dell Force10 Technical Support engineers.
Syntax
show cpu-interface-stats {cp | lp | rp1 | rp2}
Parameters
Defaults
No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command
History
Example 1
(show
cpu-interface-stats
lp)
FTOS#show cpu-interface-stats lp 1
-- Dataplane PP1 interface statistics --
Link state : Up
Recv Interrupts/Polls: 0
Recv Packets : 9807 Transmit Packets : 9808
Recv Desc Error : 0 Transmit Desc Error : 0
Recv Out of Mem : 0 Transmit Out of Mem : 0
Recv Upper Layer Full: 0 Transmit Pause Pkts : 0
Recv Other Error : 0 Transmit Other Error: 0
Recv Restarts : 0
Recv Restarts Fatal : 0
-- Dataplane PP0 interface statistics --
Link state : Up
Recv Interrupts/Polls: 0
Recv Packets : 9807 Transmit Packets : 9807
rp2-port (OPTIONAL) Enter the keyword rp2-port to display the RP-Switch information for
the CRP2 port.
lc-switch (OPTIONAL) Enter the keyword lc-switch to display the counter information for the
LC-Switch.
peer-rpm (OPTIONAL) Enter the keyword peer-rpm to display information for the peer RPM.
Version 8.1.1.2 Introduced on E-Series ExaScale E600i
Version 8.1.1.0 Introduced on E-Series ExaScale E1200i
cp
Enter the keyword
cp to display the CP's interface statistics.
lp
Enter the keyword
lp to display the LP's interface statistics
rp1
Enter the keyword rp1 to display the RP1's interface statistics
rp2
Enter the keyword rp2 to display the RP2’s interface statistics.
Version 8.1.1.2 Introduced on E-Series ExaScale E600i
Version 8.1.1.0 Introduced on E-Series ExaScale E1200i