Command Line Reference Guide

1430 | E-Series ExaScale Debugging and Diagnostics
www.dell.com | support.dell.com
hardware watchdog
e
x
Set the watchdog timer to trigger a reboot and restart the system.
Syntax
hardware watchdog
Defaults
Disabled
Command Mode
CONFIGURATION
Command
History
show control-traffic
e
x
Show information related to CP, RP1 or RP2, and ACL-FPGA related control traffic.
Syntax
show control-traffic rpm [0-1] {cp | rp1 | rp2 | acl-fpga} {counters | statistics}
Parameters
Defaults
No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command
History
show control-traffic ingress | egress
e
x
Display information related to packet drops and counters for ingress or egress IPC traffic.
Syntax
show control-traffic rpm [0-1] {ingress| egress} {counters | drops }
Parameters
Defaults
No default behavior or values
Version 8.1.1.2 Introduced on E-Series ExaScale E600i
Version 8.1.1.0 Introduced on E-Series ExaScale E1200i
cp
Enter the keyword cp to view IPC information on the CPs counters or statistics.
rp1
Enter the keyword
rp1 to display the RP1's control counters or statistics
rp2
Enter the keyword rp2 to display the RP2’s controlcounters or statistics.
acl-fpga
Enter the keyword acl-fpga to display the counters for packets transmitted through acl-fpga.
Version 8.1.1.2 Introduced on E-Series ExaScale E600i
Version 8.1.1.0 Introduced on E-Series ExaScale E1200i
ingress
Enter the keyword ingress to view control information on the ingress (LC-to-RPM) path.
egress
Enter the keyword egress to view control information on the egress (RPM-to-LC) path.
counters
(OPTIONAL) Enter the keyword
counters to display the control counters.
drops
(OPTIONAL) Enter the keyword drops to display control drop-related error counters.