Command Line Reference Guide

1428 | E-Series ExaScale Debugging and Diagnostics
www.dell.com | support.dell.com
clear hardware btm
e
x
Clear the Buffer Traffic Manager (BTM) error counters and status registers.
Syntax
clear hardware {rpm | linecard} number port-set pipe-number btm {egress | ingress | all} {errors |
status}
Parameters
Defaults
No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command
History
Example FTOS#clear hardware linecard 2 port-set 0 btm ingress errors
FTOS#clear hardware rpm 1 port-set 0 btm ingress errors
FTOS#clear hardware rpm 0 port-set 0 btm ingress errors
% Error: RPM 0 is not active.
FTOS#
Related
Commands
clear hardware rpm mac counters
e
x
Clear the MAC counters for the party-bus control switch on the IPC subsystem of the RPM.
Syntax
clear hardware rpm slot-number mac counters
Parameters
Defaults
No default behavior or values
rpm Enter the keyword rpm to clear BTM error counters or status registers on the RPM.
linecard number
Enter the keyword
linecard followed by the line card slot number to clear BTM error
counters or status registers on the specified line card.
Range: 0 to 13 on a E1200, 0 to 6 on a E600/E600i, and 0 to 5 on an E300
port-set pipe-number
Enter the keyword
port-set followed by the number of the line card or RPM’s
Port-Pipe.
Range: 0 to 1
egress errors | status
(OPTIONAL) Enter the keywords egress errors or egress status to clear egress
BTM error counters or ingress BTM status registers.
ingress errors | status
(OPTIONAL) Enter the keywords ingress errors or ingress status to clear ingress
BTM error counters or ingress BTM status registers.
all errors | status
(OPTIONAL) Enter the keywords all errors or all status to clear both egress and
ingress BTM error counters and status registers.
Version 8.1.1.2 Introduced on E-Series ExaScale E600i
Version 8.1.1.0 Introduced on E-Series ExaScale E1200i
show hardware btm Display the BTM counters
slot-number
Enter the RPM slot number.
Range: 0 -1