Command Line Reference Guide

1418 | E-Series ExaScale Debugging and Diagnostics
www.dell.com | support.dell.com
show processes ipc
e
x
Display IPC messaging used internally between FTOS processes.
Syntax
show processes ipc [recv-stats | send-stats] [cp | rp1 | rp2 | lp linecard-number]
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
Command
History
Example
(show processes
ipc recv-stats)
FTOS#show processes ipc recv-stats lp 0
IPC Receive Statistics on LP 0
Memory Used by Recv DB on this processor: 6825992 bytes
SeqNo - Last successfull Guaranteed IPC Pkt Seq No delivered from source to destination
HiWtmk - Highest socket watermark reached for destination
M-SkSize - Max socket size of destination
NonG-Rcvd - No of non-guaranteed IPC pkts received
Pri-Dr - Priority drops done for non-guaranteed pkts due to socket almost-full condition
SkFull-Dr - Any IPC packet dropped because of socket full condition
Source-> Destination SeqNo HiWtmk(%) M-SkSize NonG-Rcvd Pri-Dr
SkFull-Dr
TME: 0 -> TME: 3 0 0 41600 1 0 0
TME: 3 -> LCMGR: 0 0 0 41600 1 0 0
IPC: 0 -> IPC: 3 37557 0 41600 6376 0 0
IPC: 3 -> TME: 3 16215 0 41600 0 0 0
CLI: 0 -> SYSADMTSK: 3 11483 0 41600 0 0 0
FTOS#
Example 2
(show processes
ipc send-stats)
FTOS#show processes ipc send-stats
IPC Send Statistics on CP
Memory Used by Send DB on this processor: 2303000 bytes
SeqNo - Last sent guaranteed IPC pkt sequence no from this source to destination
Success - No of successfull guaranteed IPC packets sent from source to destination
1st-R - No of first retry attempts
2nd-R - No of second retry attempts
Fails - No of guaranteed IPC pkts that could not be transmitted
RTT(ms) - Avg. Round Trip time for guaranteed IPC packets in millisecs
recv-stats
(OPTIONAL) Enter the keyword
recv-stat to display the receiver-side details of the
IPC messages.
send-stats
(OPTIONAL) Enter the keyword send-stats to display the sender-side details of the
IPC messages.
cp
(OPTIONAL) Enter the keyword cp to view the Control Processor’s swpq statistics.
rp1
(OPTIONAL) Enter the keyword rp1 to view the Control Processor’s swpq statistics
on Route Processor 1.
rp2
(OPTIONAL) Enter the keyword rp2 to view the Control Processor’s swpq statistics
on Route Processor 2.
lp linecard-number (OPTIONAL) Enter the keyword lp followed by the line card number to view the
Control Processor’s swpq statistics on the specified line card.
Version 8.1.1.2 Introduced on E-Series ExaScale E600i
Version 8.1.1.0 Introduced on E-Series ExaScale E1200i