Command Line Reference Guide

140 | Control and Monitoring
www.dell.com | support.dell.com
Related
Commands
show software ifm
c s
Display interface management (IFM) data.
Syntax
show software ifm {clients [summary] | ifagt number | ifcb interface | stack-unit unit-ID |
trace-flags}
Parameters
Defaults
None
Command Mode
EXEC
EXEC Privilege
Command
History
S-Series Example FTOS#show software ifm clients summary
ClntType Inst svcMask subSvcMask tlvSvcMask tlvSubSvc swp
IPM 0 0x00000000 0x00000000 0x90ff71f3 0x021e0e81 31
RTM 0 0x00000000 0x00000000 0x800010ff 0x01930000 43
VRRP 0 0x00000000 0x00000000 0x803330f3 0x00400000 39
show chassis
View information on all elements of the system.
show linecard
View information on a line card.
show sfm View information on the SFM.
clients Enter the keyword clients to display IFM client information.
summary (OPTIONAL) Enter the keyword summary to display brief information about IFM
clients.
ifagt number Enter the keyword ifagt followed by the number of an interface agent to display software
pipe and IPC statistics.
ifcb interface Enter the keyword ifcb followed by one of the following interface IDs followed by the
slot/port information to display interface control block information for that interface:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet.
• For a Port Channel interface, enter the keyword
port-channel followed by a number:
C-Series and S-Series Range: 1-128
E-Series Range: 1 to 255 for TeraScale and 1 to 512 for ExaScale.
• For a 10G Ethernet interface, enter the keyword TenGigabitEthernet.
C-Series options also include:
• fastethernet for a Fast Ethernet interface
•
loopback for a Loopback interface
•
managementethernet for a Management Ethernet interface
• null for a Null interface
•
vlan for a VLAN interface (Range: 1–4094, 1-2094 for ExaScale)
stack-unit
unit-ID
Enter the keyword stack-unit followed by the stack member number to display IFM
information for that unit.
Range: 0-1
Note: This option is only available on S-Series.
trace-flags Enter the keyword trace-flags to display IFM information for internal trace flags.
Version 7.6.1.0 Introduced for C-Series and S-Series