Command Line Reference Guide

138 | Control and Monitoring
www.dell.com | support.dell.com
show rpm
c e
Show the current RPM status.
Syntax
show rpm [number [brief] | all]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
E-Series Example -- RPM card 0 --
Status : active
Next Boot : online
Card Type : RPM - Route Processor Module (LC-EH-RPM)
Hardware Rev : 3.1
Num Ports : 1
Up Time : 18 hr, 48 min
Last Restart : reset by user
FTOS Version : 8-4-1-317
Jumbo Capable : yes
CP Boot Flash : A: 2.5.1.0 [booted] B: 2.5.1.0
RP1 Boot Flash: A: 2.5.1.0 [booted] B: 2.5.1.0
RP2 Boot Flash: A: 2.5.1.0 [booted] B: 2.5.1.0
CP Mem Size : 1073741824 bytes
RP1 Mem Size : 1073741824 bytes
RP2 Mem Size : 1073741824 bytes
MMC Mem Size : 3566329856 bytes
External MMC : 128180224 bytes
USB Mem Size : n/a
Temperature : 36C
Power Status : AC
Voltage : ok
Serial Number : FX000056234
Part Number : 7520043401 Rev 05
Vendor Id : 04
Date Code : 01072010
Country Code : 01
Piece Part ID : N/A
PPID Revision : N/A
Service Tag : N/A
Expr Svc Code : N/A
Table 7-12, "Descriptions of show rpm output," in Control and Monitoring defines the fields displayed
in the example above.
number
(OPTIONAL) Enter either zero (0) or 1 for the RPM.
all (OPTIONAL) Enter the keyword all to view a table with information on all present RPMs.
brief (OPTIONAL) Enter the keyword brief to view an abbreviated list of RPM information.
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.5.1.0 Introduced on C-Series
E-Series original Command