Command Line Reference Guide

1358 | Time and Network Time Protocol (NTP)
www.dell.com | support.dell.com
clock summer-time date
c e s
Set a date (and time zone) on which to convert the switch to daylight savings time on a one-time basis.
Syntax
clock summer-time time-zone date start-month start-day start-year start-time end-month
end-day end-year end-time [offset]
To delete a daylight savings time zone configuration, enter no clock summer-time.
Parameters
Defaults
Not configured.
Command Modes
CONFIGURATION
Command
History
Related
Commands
time-zone
Enter the three-letter name for the time zone. This name is displayed in the show clock output.
start-month
Enter the name of one of the 12 months in English.
You can enter the name of a day to change the order of the display to time day month year.
start-day
Enter the number of the day.
Range: 1 to 31.
You can enter the name of a month to change the order of the display to
time day month
year.
start-year
Enter a four-digit number as the year.
Range: 1993 to 2035.
start-time
Enter the time in hours:minutes. For the hour variable, use the 24-hour format, example, 17:15 is
5:15 pm.
end-day
Enter the number of the day.
Range: 1 to 31.
You can enter the name of a month to change the order of the display to
time day month
year.
end-month
Enter the name of one of the 12 months in English.
You can enter the name of a day to change the order of the display to time day month year.
end-time
Enter the time in hours:minutes. For the hour variable, use the 24-hour format, example, 17:15 is
5:15 pm.
end-year
Enter a four-digit number as the year.
Range: 1993 to 2035.
offset
(OPTIONAL) Enter the number of minutes to add during the summer-time period.
Range: 1 to1440.
Default: 60 minutes
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
pre-Version 6.1.1.0 Introduced for E-Series
calendar set Set the hardware clock.
clock summer-time recurring Set a date (and time zone) on which to convert the switch to daylight savings
time each year.
show clock Display the current clock settings.