Command Line Reference Guide

Storm Control | 1339
show storm-control multicast
c s
Display the storm control multicast configuration.
Syntax
show storm-control multicast [interface]
Parameters
Defaults
No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command
History
Example FTOS#show storm-control multicast gigabitethernet 1/0
Multicast storm control configuration
Interface Direction Packets/Second
-----------------------------------------------
Gi 1/0 Ingress 5
FTOS#
show storm-control unknown-unicast
c e s
Display the storm control unknown-unicast configuration
Syntax
show storm-control unknown-unicast [interface]
Parameters
Defaults
No default behavior or values
Command Modes
EXEC
EXEC Privilege
interface
(OPTIONAL) Enter one of the following interfaces to display the interface specific storm
control configuration.
• For Fast Ethernet, enter the keyword Fastethernet followed by the slot/port information.
• For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the
slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by
the slot/port information.
Version 7.6.1.0 Introduced on C-Series and S-Series
interface
(OPTIONAL) Enter one of the following interfaces to display the interface specific storm
control configuration.
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the
slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by
the slot/port information.
• For a SONET interface, enter the keyword sonet followed by the slot/port information.
• Fast Ethernet is not supported.