Command Line Reference Guide

1292 | SNMP and Syslog
www.dell.com | support.dell.com
snmp-server group
c e s
Configure a new SNMP group or a table that maps SNMP users to SNMP views.
Syntax
snmp-server group [group_name {1 | 2c | 3 {auth | noauth | priv}}] [context context-name] [read
name] [write name] [notify name] [access
access-list-name | ipv6 access-list-name ]
To remove a specified group, use the no snmp-server group [group_name {v1 | v2c | v3 {auth |
noauth | priv}}][context context-name] [read name] [write name] [notify name] [access
access-list-name | ipv6 access-list-name ] command.
Parameters
Defaults
As defined above
Command Modes
CONFIGURATION
group_name
Enter a text string (up to 20 characters long) as the name of the group.
Defaults: The following groups are created for mapping to read/write
community/security-names.
• v1v2creadg — maps to a community/security-name with ro
permissions
• 1v2cwriteg — maps to a community/security-name rw
permissions
1 | 2c | 3
(OPTIONAL) Enter the security model version number (1, 2c, or 3).
•
1 is the least secure version
•
3 is the most secure of the security modes.
•
2c allows transmission of informs and counter 64, which allows for
integers twice the width of what is normally allowed.
Default:
1
auth (OPTIONAL) Enter the keyword auth to specify authentication of a packet
without encryption.
noauth (OPTIONAL) Enter the keyword noauth to specify no authentication of a
packet.
priv (OPTIONAL) Enter the keyword priv to specify both authentication and then
scrambling of the packet.
context context-name Enter the keyword context followed by the SNMP context name to specify
the context name that should be mapped to the OSPF instance.
read name
(OPTIONAL) Enter the keyword read followed by a name (a string of up to
20 characters long) as the read view name.
Default: GlobalView is set by default and is assumed to be every object
belonging to the Internet (1.3.6.1) OID space.
write name
(OPTIONAL) Enter the keyword write followed by a name (a string of up to
20 characters long) as the write view name.
notify name
(OPTIONAL) Enter the keyword notify followed by a name (a string of up to
20 characters long) as the notify view name.
access access-list-name
(Optional) Enter the standard IPv4 access list name (a string up to 140
characters long).
ipv6 access-list-name (Optional) Enter the keyword ipv6 followed by the IPv6 access list name (a
string up to 140 characters long)