Command Line Reference Guide

Service Provider Bridging | 1271
show protocol-tunnel
c e s
Display protocol tunnel information for all or a specified VLAN-Stack VLAN.
Syntax
show protocol-tunnel [vlan vlan-id]
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
Command
History
Example 1 FTOS#show protocol-tunnel
System Rate-Limit: 1000 Frames/second
Interface Vlan Protocol(s)
Gi1/2 2 STP, PVST
Gi1/3 3 STP, PVST
Po35 4 STP, PVST
FTOS#
Example 2
(specific VLAN)
FTOS#show protocol-tunnel vlan 2
System Rate-Limit: 1000 Frames/second
Interface Vlan Protocol(s)
Gi1/2 2 STP, PVST
FTOS#
Related
Commands
vlan vlan-id (OPTIONAL) Enter the keyword vlan followed by the VLAN ID to display information for the
VLAN.
Range: 1 to 4094
Version 8.2.1.0 Introduced on the C-Series, E-Series and E-Series ExaScale.
Version 7.4.1.0 Introduced
show running-config Display the current configuration.