Command Line Reference Guide

Security | 1261
Command Modes
TRACE LIST
Command
History
Related
Commands
show config
e
View the current IP trace list configuration.
Syntax
show config
Command Modes
TRACE LIST
Example FTOS(config-trace-acl)#show config
!
ip trace-list suzanne
seq 5 deny tcp any any
FTOS(config-trace-acl)#
show ip accounting trace-lists
e
View the trace lists created on the switch and the sequence of filters.
Syntax
show ip accounting trace-lists [trace-list-name [linecard number]]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Example FTOS#show ip accounting trace-list suzanne
Trace List suzanne
seq 5 deny ip any any count (0x00 packets)
seq 10 permit tcp 10.1.1.0 /24 any count bytes (0x00 bytes)
FTOS#
Version 7.4.1.0
Deprecated
established keyword—not supported on TeraScale line cards.
deny
Configure a filter to drop packets.
permit
Configure a filter to forward packets.
trace-list-name
(OPTIONAL) Enter the name of the trace list to be displayed.
linecard number (OPTIONAL) Enter the keyword linecard followed by the line card number to view
the Trace list information on that line card.
C-Series and S-Series Range: 0-7on the C300
E-Series Range: 0 to 13 on a E1200, 0 to 6 on a E600, and 0 to 5 on a E300.
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series