Command Line Reference Guide

1244 | Security
www.dell.com | support.dell.com
ip scp topdir
c e s
Identify a location for files used in secure copy transfer.
Syntax
ip scp topdir directory
To return to the default setting, enter no ip scp topdir command.
Parameters
Defaults
The internal flash (flash:) is the default directory.
Command Modes
CONFIGURATION
Command
History
Usage
Information
To configure the switch as a SCP server, use the ip ssh server command.
Related
Commands
ip ssh authentication-retries
c e s
Configure the maximum number of attempts that should be used to authenticate a user.
Syntax
ip ssh authentication-retries 1-10
Parameters
Defaults
3
Command Modes
CONFIGURATION
Command
History
Usage
Information
This command specifies the maximum number of attempts to authenticate a user on a SSH connection
with the remote host for password authentication. SSH will disconnect when the number of password
failures exceeds authentication-retries.
directory
Enter a directory name.
Version 7.6.1.0 Introduced for S-Series
Version 7.5.1.0 Introduced for C-Series
pre-Version 6.1.1.0 Introduced for E-Series
ip ssh server Enable SSH and SCP server on the switch.
1-10
Enter the number of maximum retries to authenticate a user.
Range: 1 to 10
Default: 3
Version 7.6.1.0 Introduced for S-Series
Version 7.5.1.0 Introduced for C-Series
pre-Version 6.1.1.0 Introduced for E-Series