Command Line Reference Guide

Security | 1219
enable restricted
c e s
Allows Dell Force10 technical support to access restricted commands.
Syntax
enable restricted [encryption-type] password
To disallow access to restricted commands, enter no enable restricted.
Parameters
Command Modes
Not configured.
Command
History
Usage
Information
Only Dell Force10 Technical Support staff use this command.
enable secret
c e s
Change the password for the enable command.
Syntax
enable secret [level level] [encryption-type] password
To delete a password, use the no enable secret [encryption-type] password [level level]
command.
Parameters
Defaults
No password is configured. level = 15
Command Modes
CONFIGURATION
Command
History
encryption-type (OPTIONAL) Enter the number 7 as the encryption type.
Enter
7 followed a text string as the hidden password. The text string must be a
password that was already encrypted by a Dell Force10 router.
Use this parameter only with a password that you copied from the show
running-config
file of another Dell Force10 router.
password
Enter a text string, up to 32 characters long, as the clear text password.
Version 7.6.1.0 Introduced for S-Series
Version 7.5.1.0 Introduced for C-Series
pre-Version 6.1.1.0 Introduced for E-Series
level level (OPTIONAL) Enter the keyword level followed by a number as the level of access.
Range: 1 to 15
encryption-type (OPTIONAL) Enter the number 5 or 0 as the encryption type.
Enter a
5 followed a text string as the hidden password. The text string must be a
password that was already encrypted by a Dell Force10 router.
Use this parameter only with a password that you copied from the
show
running-config
file of another Dell Force10 router.
password
Enter a text string, up to 32 characters long, as the clear text password.
Version 7.6.1.0 Introduced for S-Series
Version 7.5.1.0 Introduced for C-Series
pre-Version 6.1.1.0 Introduced for E-Series