Command Line Reference Guide

Security | 1217
Default
Not configured (that is, no authentication is performed)
Command Modes
CONFIGURATION
Command
History
Usage
Information
By default, the locally configured username password will be used. If aaa authentication login
default is configured, FTOS will use the methods defined by this command for login instead.
Methods configured with the aaa authentication login command are evaluated in the order they are
configured. If users encounter an error with the first method listed, FTOS applies the next method
configured. If users fail the first method listed, no other methods are applied. The only exception is the
local method. If the user’s name is not listed in the local database, the next method is applied. If the
correct user name/password combination are not entered, the user is not allowed access to the switch.
After configuring the aaa authentication login command, configure the login authentication command
to enable the authentication scheme on terminal lines.
Connections to the SSH server will work with the following login mechanisms: local, radius and
tacacs.
Related
Commands
access-class
c e s
Restrict incoming connections to a particular IP address in a defined IP access control list (ACL).
Syntax
access-class access-list-name
To delete a setting, use the no access-class command.
Parameters
Defaults
Not configured.
Command Modes
LINE
Version 7.6.1.0 Introduced for S-Series
Version 7.5.1.0 Introduced for C-Series
pre-Version 6.2.1.0 Introduced on E-Series
Note: If authentication fails using the primary method, FTOS employs the second method (or third
method, if necessary) automatically. For example, if the TACACS+ server is reachable, but the server
key is invalid, FTOS proceeds to the next authentication method. The TACACS+ is incorrect, but the
user is still authenticated by the secondary method.
login authentication Apply an authentication method list to designated terminal lines.
password Create a password.
radius-server host Specify a RADIUS server host.
tacacs-server host Specify a TACACS+ server host.
access-list-name
Enter the name of an established IP Standard ACL.