Command Line Reference Guide

1158 | Quality of Service (QoS)
www.dell.com | support.dell.com
clear queue statistics ingress
e
Clear ingress queue statistics.
Syntax
clear queue statistics ingress [unicast [src-card ID [dst-card ID]] | [multicast] [src-card ID]]
Parameters
Defaults
No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command
History
Related
Commands
show queue statistics egress
e
Display the egress queue statistics.
Syntax
show queue statistics egress [unicast | multicast] [Interface] [brief]
Parameters
Defaults
No default behavior or values
unicast [src-card
ID
[dst-card ID]]
(OPTIONAL) Enter the keyword unicast to clear Unicast queue statistics.
Optionally, enter the source card identification (
src-card ID) and the
destination card identification (
dst-card ID) to clear the unicast statistics
from the source card to the destination card.
multicast [src-card ID]
(OPTIONAL) Enter the keyword multicast to clear only Multicast queue
statistics. Optionally, enter the source card identification (
src-card ID) to
clear the multicast statistics from the source card. Default: Both Unicast and
Multicast queue statistics are cleared.
Version 6.2.1.1 Introduced
clear queue statistics egress
Clear egress queue statistics
show queue statistics egress
Display egress queue statistics
show queue statistics ingress
Display ingress queue statistics
unicast | multicast (OPTIONAL) Enter the keyword multicast to display only Multicast queue statistics.
Enter the keyword
unicast to display only Unicast queue statistics.
Default: Both Unicast and Multicast queue statistics are displayed.
Interface
(OPTIONAL) Enter one of the following interfaces to display the interface specific
queue statistics.
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed
by the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet
followed by the slot/port information.
• For a SONET interface, enter the keyword
sonet followed by the slot/port
information.
•Fast Ethernet
is not supported.
brief (OPTIONAL) Enter the keyword brief to display only ingress per link buffering and
egress per port buffering statistics.