Command Line Reference Guide

1156 | Quality of Service (QoS)
www.dell.com | support.dell.com
wred
e
Designate the WRED profile to yellow or green traffic.
Syntax
wred {yellow | green} profile-name
To remove the WRED drop precedence, use the no wred {yellow | green} [profile-name] command.
Parameters
Defaults
No default behavior or values
Command Modes
CONFIGURATION (conf-qos-policy-out)
Command
History
Usage
Information
Use this command to assign drop precedence to green or yellow traffic. If there is no honoring enabled
on the input, all the traffic defaults to green drop precedence.
Related
Commands
wred-profile
e
Create a WRED profile and name that profile.
Syntax
wred-profile wred-profile-name
To remove an existing WRED profile, use the no wred-profile command.
Parameters
Defaults
The five pre-defined WRED profiles. When a new profile is configured, the minimum and maximum
threshold defaults to predefined wred_ge_g values
Command Modes
CONFIGURATION
Command
History
Usage
Information
Use the default pre-defined profiles or configure your own profile. You can not delete the pre-defined
profiles or their default values. This command enables the WRED configuration mode—(conf-wred).
Related
Commands
yellow | green
Enter the keyword yellow for yellow traffic. DSCP value of xxx110 and xxx100 maps to yellow.
Enter the keyword green for green traffic. DSCP value of xxx010 maps to green.
profile-name
Enter your WRED profile name in character format (16 character maximum). Or use one
of the 5 pre-defined WRED profile names.
Pre-defined Profiles:
wred_drop, wred-ge_y, wred_ge_g, wred_teng_y, wred_teng_
Version 8.2.1.0 Profile name character limit increased from 16 to 32.
pre-Version 6.1.1.1 Introduced on E-Series
wred-profile Create a WRED profile and name that profile
trust Define the dynamic classification to trust DSCP
wred-profile-name
Enter your WRED profile name in character format (16 character maximum). Or use
one of the pre-defined WRED profile names. You can configure up to 26 WRED
profiles plus the 5 pre-defined profiles, for a total of 31 WRED profiles.
Pre-defined Profiles:
wred_drop, wred-ge_y, wred_ge_g, wred_teng_y, wred_teng_g
pre-Version 6.1.1.1 Introduced on E-Series
threshold Specify the minimum and maximum threshold values of the WRED profile