Command Line Reference Guide

1140 | Quality of Service (QoS)
www.dell.com | support.dell.com
Command
History
Usage
Information
A single policy-map can be attached to one or more interfaces to specify the service-policy for those
interfaces. A policy map attached to an interface can be modified.
Related
Commands
service-queue
c e s
Assign a class map and QoS policy to different queues.
Syntax
service-queue queue-id [class-map class-map-name] [qos-policy qos-policy-name]
To remove the queue assignment, use the no service-queue queue-id [class-map class-map-name]
[qos-policy qos-policy-name] command.
Parameters
Defaults
No default behavior or values
Command Modes
CONFIGURATION (conf-policy-map-in and conf-policy-map-out)
Command
History
Usage
Information
There are eight (8) queues per interface on the E-Series and four (4) queues per interface on the
C-Series and S-Series. This command assigns a class map or QoS policy to different queues.
Related
Commands
Version 7.6.1.0 Introduced on C-Series and S-Series
pre-Version 6.1.1.1 Introduced on E-Series
policy-map-output Create an output policy map.
queue-id
Enter the value used to identify a queue.
Range: 0 to 7 on E-Series (eight queues per interface), 0-3 on C-Series and S-Series
(four queues per interface; four queues are reserved for control traffic.)
class-map
class-map-name
(OPTIONAL) Enter the keyword class-map followed by the class map name
assigned to the queue in character format (16 character maximum).
Note: This option is available under policy-map-input only.
qos-policy
qos-policy-name
(OPTIONAL) Enter the keyword qos-policy followed by the QoS policy name
assigned to the queue in text format (16 characters maximum). This specifies the input
QoS policy assigned to the queue under policy-map-input and output QoS policy
under policy-map-output context.
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.1.1.1 Introduced on E-Series
class-map Identify the class map.
service-policy input Apply an input policy map to the selected interface.
service-policy output Apply an output policy map to the selected interface.