Command Line Reference Guide

1126 | Quality of Service (QoS)
www.dell.com | support.dell.com
Command Modes
CLASS-MAP CONFIGURATION (config-class-map)
Command
History
Usage
Information
You must enter the class-map command in order to access this command. Once the class map is
identified, you can configure the match criteria. For class-map match-any, a maximum of five ACL
match criteria are allowed. For class-map match-all, only one ACL match criteria is allowed.
Related
Commands
description
c e s
Add a description to the selected policy map or QOS policy.
Syntax
description {description}
To remove the description, use the no description {description} command.
Parameters
Defaults
No default behavior or values
Command Modes
CONFIGURATION (policy-map-input and policy-map-output; conf-qos-policy-in and
conf-qos-policy-out; wred)
Command
History
Related
Commands
Version 7.7.1.0 Added DSCP Marking option support on S-Series
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
Version 7.5.1.0 Added support for DSCP Marking option
pre-Version 6.1.1.1 Introduced on E-Series
class-map Identify the class map.
description
Enter a description to identify the policies (80 characters maximum).
pre-Version 7.7.1.0 Introduced
policy-map-input Create an input policy map.
policy-map-output Create an output policy map.
qos-policy-input Create an input QOS-policy on the router.
qos-policy-output Create an output QOS-policy on the router.
wred-profile Create a WRED profile.