Command Line Reference Guide

Control and Monitoring | 111
-- RPM Environment Status --
Slot Status Temp Voltage
---------------------------------------------------------------------------
0 active 36C ok
1 not present
-- SFM Environment Status --
E-Series Example
(show
environment fan)
-- Fan Status --
Status Temp Fan1 Fan2 Fan3 Serial Num Version
--------------------------------------------------------------
up 32C 6000 RPM 6000 RPM 6000 RPM FX000040889 3.2
C-Series
Example (show
environment fan)
FTOS#show env fan
-- Fan Status --
-------------------------------------------------------------------
Tray 0
-------------------------------------------------------------------
FanNumber Speed Status
0 4170 up
1 4140 up
2 3870 up
3 4140 up
4 3870 up
5 3810 up
FTOS#
show environment (S-Series)
s
View S-Series system component status (for example, temperature, voltage).
Syntax
show environment [all | fan | stack-unit unit-id | pem]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
all Enter the keyword all to view all components.
fan Enter the keyword fan to view information on the fans. The output of this
command is chassis dependent.
stack-unit unit-id Enter the keyword stack-unit followed by the unit-id to display information on a
specific stack member. Range: 0 to 1.
pem Enter the keyword pem to view only information on power entry modules.
Version 7.8.1.0
The output of the
show environment fan command for S-Series is changed to display
fan speeds instead of just showing the fan status as up or down.
Version 7.6.1.0 Introduced for S-Series. S-Series options and output differ from the
C-Series/E-Series version.