Command Line Reference Guide

1064 | PIM-Sparse Mode (PIM-SM)

www.dell.com | support.dell.com

IPv6 PIM-Sparse Mode Commands

The IPv6 PIM-SM commands are:

• ipv6 pim bsr-border

• ipv6 pim bsr-candidate

• ipv6 pim dr-priority

• ipv6 pim join-filter

• ipv6 pim query-interval

• ipv6 pim neighbor-filter

• ipv6 pim register-filter

• ipv6 pim rp-address

• ipv6 pim rp-candidate

• ip pim sparse-mode

• ipv6 pim spt-threshold

• show ipv6 pim bsr-router

• show ipv6 pim interface

• show ipv6 pim neighbor

• show ipv6 pim rp

• show ipv6 pim tib

clear ipv6 pim tib

Clear the IPv6 PIM multicast-routing database (tree information base—tib).

Syntax

clear ipv6 pim tib [group-address]

Parameters

Defaults

No default values or behavior

Command Modes

EXEC Privilege

Command

History

Commands

group-address (OPTIONAL) Enter the multicast group address in the x:x:x:x::x format.

The :: notation specifies successive hexadecimal fields of zero.

Version 7.4.1.0 Introduced

show ipv6 pim tib Display the IPv6 PIM tree information base (tib)