Command Line Reference Guide

ManualsBrandsDell ManualsserversDell Force10 E600i

1051

PIM-Sparse Mode (PIM-SM) | 1059

Example FTOS#show ip pim snooping neighbor

Neighbor Interface Uptime/Expires Ver DR Prio

Address

165.87.32.2 Vl 2 [Gi 4/13 ] 00:04:03/00:01:42 v2 1

165.87.32.10 Vl 2 [Gi 4/11 ] 00:00:46/00:01:29 v2 0

165.87.32.12 Vl 2 [Gi 4/20 ] 00:00:51/00:01:24 v2 0

show ip pim snooping tib

Display information from the tree information base (TIB) discovered by PIM-SM snooping about

multicast group members and states.

Syntax

show ip pim snooping tib [vlan vlan-id] [group-address [source-address]]

Parameters

Command Modes

EXEC

EXEC Privilege

Command

History

Example FTOS#show ip pim snooping tib

PIM Multicast Snooping Table

Flags: J/P - (*,G) Join/Prune, j/p - (S,G) Join/Prune

SGR-P - (S,G,R) Prune

Timers: Uptime/Expires

* : Inherited port

Table 43-116. show ip pim snooping neighbor Command Example Fields

Field Description

Neighbor address Displays the IP address of the neighbor learned through PIM-SM snooping.

Interface Displays the VLAN ID number and slot/port on which the PIM-SM-enabled neighbor

was discovered.

Uptime/expires Displays the amount of time the neighbor has been up followed by the amount of time

until the neighbor is removed from the multicast routing table (that is, until the neighbor

hold time expires).

Ver Displays the PIM version number.

• v2 = PIM version 2

DR prio/Mode Displays the Designated Router priority and the mode.

• 1 = default Designated Router priority (use ip pim dr-priority)

• DR = Designated Router

• S = Sparse mode

vlan vlan-id (OPTIONAL) Enter a VLAN ID to display TIB information discovered by PIM-SM

snooping on a specified VLAN. Valid VLAN IDs: 1 to 4094.

group-address (OPTIONAL) Enter the group address in dotted decimal format (A.B.C.D) to display

TIB information discovered by PIM-SM snooping for a specified multicast group.

source-address (OPTIONAL) Enter the source address in dotted decimal format (A.B.C.D) to display

TIB information discovered by PIM-SM snooping for a specified multicast source.

Version 8.4.1.1 Introduced on E-Series ExaScale