Command Line Reference Guide

1058 | PIM-Sparse Mode (PIM-SM)
www.dell.com | support.dell.com
show ip pim snooping interface
e
x
Display information on VLAN interfaces with PIM-SM snooping enabled.
Syntax
show ip pim snooping interface [vlan vlan-id]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Example FTOS#show ip pim snooping interface
Interface Ver Nbr DR DR
Count Prio
Vlan 2 v2 3 1 165.87.32.2
show ip pim snooping neighbor
e
x
Display information on PIM neighbors learned through PIM-SM snooping.
Syntax
show ip pim snooping neighbor [vlan vlan-id]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
vlan vlan-id (OPTIONAL) Enter a VLAN ID to display information about a specified VLAN
configured for PIM-SM snooping. Valid VLAN IDs: 1 to 4094.
Version 8.4.1.1 Introduced on E-Series ExaScale
Table 43-115. show ip pim snooping interface Command Example Fields
Field Description
Interface Displays the VLAN interfaces with PIM-SM snooping enabled.
Ver/Mode Displays the PIM version number for each VLAN interface with PIM-SM snooping enabled:
• v2 = PIM version 2
• S = PIM Sparse mode
Nbr Count Displays the number of neighbors learned through PIM-SM snooping on the interface.
DR Prio
Displays the Designated Router priority value configured on the interface (ip pim dr-priority command).
DR Displays the IP address of the Designated Router for that interface.
vlan vlan-id (OPTIONAL) Enter a VLAN ID to display information about PIM neighbors that was
discovered by PIM-SM snooping on a specified VLAN.
Valid VLAN IDs: 1 to 4094.
Version 8.4.1.1 Introduced on E-Series ExaScale