Manualshelf

Command Line Reference Guide

ManualsBrandsDell ManualsserversDell Force10 E600i
1051105210531054105510561057105810591060
PIM-Sparse Mode (PIM-SM) | 1055
show ip pim interface
c e s
View information on the interfaces with IP PIM enabled.
Syntax
show ip pim interface
Command Modes
EXEC
EXEC Privilege
Command
History
Example E600-7-RPM0#show ip pim interface
Address Interface Ver/ Nbr Query DR DR
Mode Count Intvl Prio
172.21.200.254 Gi 7/9 v2/S 0 30 1 172.21.200.254
172.60.1.2 Gi 7/11 v2/S 0 30 1 172.60.1.2
192.3.1.1 Gi 7/16 v2/S 1 30 1 192.3.1.1
192.4.1.1 Gi 13/5 v2/S 0 30 1 192.4.1.1
172.21.110.1 Gi 13/6 v2/S 0 30 1 172.21.110.1
172.21.203.1 Gi 13/7 v2/S 0 30 1 172.21.203.1
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.8.1.0 Introduced on S-Series
Table 43-113. show ip pim interface Command Example Fields
Field Description
Address Lists the IP addresses of the interfaces participating in PIM.
Interface List the interface type, with either slot/port information or ID (VLAN or Port Channel), of the
interfaces participating in PIM.
Ver/Mode Displays the PIM version number and mode for each interface participating in PIM.
• v2 = PIM version 2
• S = PIM Sparse mode
Nbr Count Displays the number of PIM neighbors discovered over this interface.
Query Intvl Displays the query interval for Router Query messages on that interface (configured with ip pim
query-interval command).
DR Prio Displays the Designated Router priority value configured on the interface (ip pim dr-priority
command).
DR Displays the IP address of the Designated Router for that interface.