Command Line Reference Guide

PIM-Sparse Mode (PIM-SM) | 1045
Command
History
Related
Commands
debug ip pim
c e s
View IP PIM debugging messages.
Syntax
debug ip pim [bsr | events | group | packet [in | out] | register | state | timer [assert | hello |
joinprune | register]]
To disable PIM debugging, enter no debug ip pim, or enter undebug all to disable all debugging.
Parameters
Defaults
Disabled
Command Modes
EXEC Privilege
Command
History
Version 8.4.1.1 Introduced on E-Series ExaScale
show ip pim snooping tib Display TIB information learned through PIM-SM snooping.
bsr (OPTIONAL) Enter the keyword bsr to view PIM Candidate RP/BSR activities.
events (OPTIONAL) Enter the keyword events to view PIM events.
group (OPTIONAL) Enter the keyword group to view PIM messages for a specific group.
packet [in | out] (OPTIONAL) Enter the keyword packet to view PIM packets. Enter one of the
optional parameters:
• in: to view incoming packets
• out: to view outgoing packets.
register (OPTIONAL) Enter the keyword register to view PIM register address in dotted
decimal format (A.B.C.D).
state (OPTIONAL) Enter the keyword state to view PIM state changes.
timer [assert | hello |
joinprune | register]
(OPTIONAL) Enter the keyword timer to view PIM timers. Enter one of the optional parameters:
• assert: to view the assertion timer.
• hello: to view the PIM neighbor keepalive timer.
• joinprune: to view the expiry timer (join/prune timer)
• register: to view the register suppression timer.
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.8.1.0 Introduced on S-Series