Command Line Reference Guide

1042 | PIM-Dense Mode (PIM-DM)
www.dell.com | support.dell.com
Usage
Information
Currently, the chassis operates in either PIM Dense-Mode or PIM Sparse-Mode. The mode
configuration for the first PIM enabled interface determines the mode for the entire chassis.
Subsequent configurations, on other interfaces, to enable PIM is only accepted if the mode is the same
as the original configuration mode. The chassis PIM mode can be changed if PIM-configuration from
all interfaces are removed prior to applying a new PIM mode configuration.
Related
Commands
ip pim sparse-mode Configure sparse-mode
show ip pim tib Display PIM tree information.