Reference Guide

90 | 802.1ag
www.dell.com | support.dell.com
Three values are given within the trap messages: MD Index, MA Index, and MPID. You can reference
these values against the output of
show ethernet cfm domain and show ethernet cfm maintenance-points
local mep.
FTOS#show ethernet cfm maintenance-points local mep
-------------------------------------------------------------------------------
MPID Domain Name Level Type Port CCM-Status
MA Name VLAN Dir MAC
-------------------------------------------------------------------------------
100 cfm0 7 MEP Gi 4/10 Enabled
test0 10 DOWN 00:01:e8:59:23:45
FTOS(conf-if-gi-0/6)#do show ethernet cfm domain
Domain Name: My_Name
MD Index: 1
Level: 0
Total Service: 1
Services
MA-Index MA-Name VLAN CC-Int X-CHK Status
1 test 0 1s enabled
Domain Name: Your_Name
MD Index: 2
Level: 2
Total Service: 1
Services
MA-Index MA-Name VLAN CC-Int X-CHK Status
1 test 100 1s enabled