Reference Guide

Port Monitoring | 775
2
source
{
single-interface |
range {interface-list
| interface-range |
mixed-interface-list}
}
[vlan vlan-id | vlan
range {
vlan-list |
vlan-range |
mixed-vlan-list}]
destination
remote-vlan
vlan-id
direction {rx | tx |
both}
MONITOR
SESSION
Configure the source ports and (optional) source VLANs with the
reserved VLAN used to transport mirrored traffic, and the ingress/
egress traffic to be mirrored.
single-interface specifies one of the following port types:
1-Gigabit Ethernet: Enter gigabitethernet slot/port.
10-Gigabit Ethernet: Enter tengigabitethernet slot/port.
Port channel: Enter port-channel {1-511}.
2
source
{
single-interface |
range {interface-list
| interface-range |
mixed-interface-list}
}
[vlan vlan-id | vlan
range {
vlan-list |
vlan-range |
mixed-vlan-list}]
destination
remote-vlan
vlan-id
direction {rx | tx |
both}
MONITOR
SESSION
range interface-list specifies multiple source ports separated by a
space, comma and space: single-interface , single-interface , ...
range interface-range specifies one of the following port ranges:
gigabitethernet slot/first_port - last_port tengigabitethernet
slot/first_port - last_port
port-channel first_number - last_number
A space is required before and after the dash (-).
range mixed-interface-list specifies single ports and port ranges
in any order: single-interface, interface-range, single-interface...
vlan vlan-id selects traffic only from a single VLAN on the
source port(s). Range: 1-4094.
vlan range vlan-list selects traffic from multiple VLANs on the
source port(s). In the VLAN list, separate VLAN IDs by a comma
and space: vlan range vlan-id, vlan-id, vlan-id...
vlan range vlan-range selects traffic from a range of VLANs on
the source port(s). Enter the VLAN range in the format:
vlan range first_vlanID - last_vlanID.
A space is required before and after the dash (-).
vlan range mixed-vlan-list selects traffic from single VLANs
and VLAN ranges on the source port(s). Enter the mixed VLAN
list in any order:
vlan range vlan-id, first_vlanID - last_vlanID, vlan-id...
destination remote-vlan vlan-id associates the reserved VLAN
with the source ports used in this source session.
direction specifies the incoming/outgoing traffic on the source
port/ to be mirrored: ingress (rx), egress (tx), or ingress and egress
(both).
3 no disable MONITOR
SESSION
Activate a remote-port mirroring session.
Configure a Source Session on Multiple Switches
Ste
p Command Syntax Command Mode Task